茶园资源网

Redis集群详解
站长资源 2024/12/22 佚名
2 0
茶园资源网 Design By www.iooam.com

Redis集群详解

Redis有三种集群模式，分别是：

* 主从模式

* Sentinel模式

* Cluster模式

三种集群模式各有特点，关于Redis介绍可以参考这里：NoSQL（二)——Redis

Redis官网：https://redis.io/ ，最新版本6.0.5

主从模式

主从模式介绍
主从模式是三种模式中最简单的，在主从复制中，数据库分为两类：主数据库(master)和从数据库(slave)。

其中主从复制有如下特点：

* 主数据库可以进行读写操作，当读写操作导致数据变化时会自动将数据同步给从数据库

* 从数据库一般都是只读的，并且接收主数据库同步过来的数据

* 一个master可以拥有多个slave，但是一个slave只能对应一个master

* slave挂了不影响其他slave的读和master的读和写，重新启动后会将数据从master同步过来

* master挂了以后，不影响slave的读，但redis不再提供写服务，master重启后redis将重新对外提供写服务

* master挂了以后，不会在slave节点中重新选一个master

工作机制：

当slave启动后，主动向master发送SYNC命令。master接收到SYNC命令后在后台保存快照（RDB持久化）和缓存保存快照这段时间的命令，然后将保存的快照文件和缓存的命令发送给slave。slave接收到快照文件和命令后加载快照文件和缓存的执行命令。

复制初始化后，master每次接收到的写命令都会同步发送给slave，保证主从数据一致性。

安全设置：

当master节点设置密码后，

客户端访问master需要密码

启动slave需要密码，在配置文件中配置即可

客户端访问slave不需要密码

缺点：

从上面可以看出，master节点在主从模式中唯一，若master挂掉，则redis无法对外提供写服务。

主从模式搭建

环境准备：

master节点 192.168.30.128

slave节点 192.168.30.129

slave节点 192.168.30.130

全部下载安装：

# cd /software
# wget http://download.redis.io/releases/redis-6.0.5.tar.gz
# tar zxf redis-5.0.4.tar.gz && mv redis-6.0.5/ /usr/local/redis
# cd /usr/local/redis && make && make install
# echo $"htmlcode">



# vim /usr/libexec/redis-shutdown

#!/bin/bash
#
# Wrapper to close properly redis and sentinel
test x"$REDIS_DEBUG" != x && set -x

REDIS_CLI=/usr/local/bin/redis-cli

# Retrieve service name
SERVICE_NAME="$1"
if [ -z "$SERVICE_NAME" ]; then
  SERVICE_NAME=redis
fi

# Get the proper config file based on service name
CONFIG_FILE="/usr/local/redis/$SERVICE_NAME.conf"

# Use awk to retrieve host, port from config file
HOST=`awk '/^[[:blank:]]*bind/ { print $2 }' $CONFIG_FILE | tail -n1`
PORT=`awk '/^[[:blank:]]*port/ { print $2 }' $CONFIG_FILE | tail -n1`
PASS=`awk '/^[[:blank:]]*requirepass/ { print $2 }' $CONFIG_FILE | tail -n1`
SOCK=`awk '/^[[:blank:]]*unixsocket\s/ { print $2 }' $CONFIG_FILE | tail -n1`

# Just in case, use default host, port
HOST=${HOST:-127.0.0.1}
if [ "$SERVICE_NAME" = redis ]; then
  PORT=${PORT:-6379}
else
  PORT=${PORT:-26739}
fi

# Setup additional parameters
# e.g password-protected redis instances
[ -z "$PASS" ] || ADDITIONAL_PARAMS="-a $PASS"

# shutdown the service properly
if [ -e "$SOCK" ] ; then
    $REDIS_CLI -s $SOCK $ADDITIONAL_PARAMS shutdown
else
    $REDIS_CLI -h $HOST -p $PORT $ADDITIONAL_PARAMS shutdown
fi








# chmod +x /usr/libexec/redis-shutdown
# useradd -s /sbin/nologin redis
# chown -R redis:redis /usr/local/redis
# chown -R reids:redis /data/redis
# yum install -y bash-completion && source /etc/profile         #命令补全

# systemctl daemon-reload
# systemctl enable redis






修改配置：


192.168.30.128





# mkdir -p /data/redis

# vim /usr/local/redis/redis.conf

bind 192.168.30.128        #监听ip，多个ip用空格分隔
daemonize yes        #允许后台启动
logfile "/usr/local/redis/redis.log"        #日志路径
dir /data/redis         #数据库备份文件存放目录
masterauth 123456        #slave连接master密码，master可省略
requirepass 123456       #设置master连接密码，slave可省略

appendonly yes         #在/data/redis/目录生成appendonly.aof文件，将每一次写操作请求都追加到appendonly.aof 文件中

# echo 'vm.overcommit_memory=1'  /etc/sysctl.conf

# sysctl -p






192.168.30.129





# mkdir -p /data/redis

# vim /usr/local/redis/redis.conf

bind 192.168.30.129
daemonize yes
logfile "/usr/local/redis/redis.log"
dir /data/redis
replicaof 192.168.30.128 6379
masterauth 123456
requirepass 123456
appendonly yes

# echo 'vm.overcommit_memory=1'  /etc/sysctl.conf

# sysctl -p






192.168.30.130





# mkdir -p /data/redis

# vim /usr/local/redis/redis.conf

bind 192.168.30.130
daemonize yes
logfile "/usr/local/redis/redis.log"
dir /data/redis
replicaof 192.168.30.128 6379
masterauth 123456
requirepass 123456
appendonly yes

# echo 'vm.overcommit_memory=1'  /etc/sysctl.conf

# sysctl -p






全部启动redis：




# systemctl start redis




查看集群状态：





# redis-cli -h 192.168.30.128 -a 123456
Warning: Using a password with '-a' or '-u' option on the command line interface may not be safe.

192.168.30.128:6379> info replication
# Replication
role:master
connected_slaves:2
slave0:ip=192.168.30.129,port=6379,state=online,offset=168,lag=1
slave1:ip=192.168.30.130,port=6379,state=online,offset=168,lag=1
master_replid:fb4941e02d5032ad74c6e2383211fc58963dbe90
master_replid2:0000000000000000000000000000000000000000
master_repl_offset:168
second_repl_offset:-1
repl_backlog_active:1
repl_backlog_size:1048576
repl_backlog_first_byte_offset:1
repl_backlog_histlen:168









# redis-cli -h 192.168.30.129 -a 123456 info replication

Warning: Using a password with '-a' or '-u' option on the command line interface may not be safe.
# Replication
role:slave
master_host:192.168.30.128
master_port:6379
master_link_status:up
master_last_io_seconds_ago:1
master_sync_in_progress:0
slave_repl_offset:196
slave_priority:100
slave_read_only:1
connected_slaves:0
master_replid:fb4941e02d5032ad74c6e2383211fc58963dbe90
master_replid2:0000000000000000000000000000000000000000
master_repl_offset:196
second_repl_offset:-1
repl_backlog_active:1
repl_backlog_size:1048576
repl_backlog_first_byte_offset:1
repl_backlog_histlen:196






数据演示：





192.168.30.128:6379> keys *
(empty list or set)

192.168.30.128:6379> set key1 100
OK

192.168.30.128:6379> set key2 lzx
OK

192.168.30.128:6379> keys *
1) "key1"
2) "key2"









# redis-cli -h 192.168.30.129 -a 123456
Warning: Using a password with '-a' or '-u' option on the command line interface may not be safe.

192.168.30.129:6379> keys *
1) "key2"
2) "key1"

192.168.30.129:6379> CONFIG GET dir
1) "dir"
2) "/data/redis"

192.168.30.129:6379> CONFIG GET dbfilename
1) "dbfilename"
2) "dump.rdb"

192.168.30.129:6379> get key1
"100"

192.168.30.129:6379> get key2
"lzx"

192.168.30.129:6379> set key3 aaa
(error) READONLY You can't write against a read only replica.









# redis-cli -h 192.168.30.130 -a 123456
Warning: Using a password with '-a' or '-u' option on the command line interface may not be safe.

192.168.30.130:6379> keys *
1) "key2"
2) "key1"

192.168.30.130:6379> CONFIG GET dir
1) "dir"
2) "/data/redis"

192.168.30.130:6379> CONFIG GET dbfilename
1) "dbfilename"
2) "dump.rdb"

192.168.30.130:6379> get key1
"100"

192.168.30.130:6379> get key2
"lzx"

192.168.30.130:6379> set key3 aaa
(error) READONLY You can't write against a read only replica.






可以看到，在master节点写入的数据，很快就同步到slave节点上，而且在slave节点上无法写入数据。


Sentinel模式


Sentinel模式介绍

主从模式的弊端就是不具备高可用性，当master挂掉以后，Redis将不能再对外提供写入操作，因此sentinel应运而生。


sentinel中文含义为哨兵，顾名思义，它的作用就是监控redis集群的运行状况，特点如下：






* sentinel模式是建立在主从模式的基础上，如果只有一个Redis节点，sentinel就没有任何意义


* 当master挂了以后，sentinel会在slave中选择一个做为master，并修改它们的配置文件，其他slave的配置文件也会被修改，比如slaveof属性会指向新的master


* 当master重新启动后，它将不再是master而是做为slave接收新的master的同步数据


* sentinel因为也是一个进程有挂掉的可能，所以sentinel也会启动多个形成一个sentinel集群


* 多sentinel配置的时候，sentinel之间也会自动监控


* 当主从模式配置密码时，sentinel也会同步将配置信息修改到配置文件中，不需要担心


* 一个sentinel或sentinel集群可以管理多个主从Redis，多个sentinel也可以监控同一个redis


* sentinel最好不要和Redis部署在同一台机器，不然Redis的服务器挂了以后，sentinel也挂了






工作机制：




* 每个sentinel以每秒钟一次的频率向它所知的master，slave以及其他sentinel实例发送一个 PING 命令


* 如果一个实例距离最后一次有效回复 PING 命令的时间超过 down-after-milliseconds 选项所指定的值， 则这个实例会被sentinel标记为主观下线。


* 如果一个master被标记为主观下线，则正在监视这个master的所有sentinel要以每秒一次的频率确认master的确进入了主观下线状态


* 当有足够数量的sentinel（大于等于配置文件指定的值）在指定的时间范围内确认master的确进入了主观下线状态， 则master会被标记为客观下线


* 在一般情况下， 每个sentinel会以每 10 秒一次的频率向它已知的所有master，slave发送 INFO 命令


* 当master被sentinel标记为客观下线时，sentinel向下线的master的所有slave发送 INFO 命令的频率会从 10 秒一次改为 1 秒一次


* 若没有足够数量的sentinel同意master已经下线，master的客观下线状态就会被移除；

若master重新向sentinel的 PING 命令返回有效回复，master的主观下线状态就会被移除






当使用sentinel模式的时候，客户端就不要直接连接Redis，而是连接sentinel的ip和port，由sentinel来提供具体的可提供服务的Redis实现，这样当master节点挂掉以后，sentinel就会感知并将新的master节点提供给使用者。


Sentinel模式搭建


环境准备：






master节点 192.168.30.128 sentinel端口：26379


slave节点 192.168.30.129 sentinel端口：26379


slave节点 192.168.30.130 sentinel端口：26379






修改配置：


前面已经下载安装了redis，这里省略，直接修改sentinel配置文件。


192.168.30.128




# vim /usr/local/redis/sentinel.conf


daemonize yes

logfile "/usr/local/redis/sentinel.log"

dir "/usr/local/redis/sentinel"                 #sentinel工作目录

sentinel monitor mymaster 192.168.30.128 6379 2                 #判断master失效至少需要2个sentinel同意，建议设置为n/2+1，n为sentinel个数

sentinel auth-pass mymaster 123456

sentinel down-after-milliseconds mymaster 30000                 #判断master主观下线时间，默认30s




这里需要注意，sentinel auth-pass mymaster 123456需要配置在sentinel monitor mymaster 192.168.30.128 6379 2下面，否则启动报错：





# /usr/local/bin/redis-sentinel /usr/local/redis/sentinel.conf

*** FATAL CONFIG FILE ERROR ***
Reading the configuration file, at line 104
> 'sentinel auth-pass mymaster 123456'
No such master with specified name.






全部启动sentinel：




# mkdir /usr/local/redis/sentinel && chown -R redis:redis /usr/local/redis


# /usr/local/bin/redis-sentinel /usr/local/redis/sentinel.conf






任一主机查看日志：




# tail -f /usr/local/redis/sentinel.log


21574:X 09 May 2019 15:32:04.298 # Sentinel ID is 30c417116a8edbab09708037366c4a7471beb770

21574:X 09 May 2019 15:32:04.298 # +monitor master mymaster 192.168.30.128 6379 quorum 2

21574:X 09 May 2019 15:32:04.299 * +slave slave 192.168.30.129:6379 192.168.30.129 6379 @ mymaster 192.168.30.128 6379

21574:X 09 May 2019 15:32:04.300 * +slave slave 192.168.30.130:6379 192.168.30.130 6379 @ mymaster 192.168.30.128 6379

21574:X 09 May 2019 15:32:16.347 * +sentinel sentinel 79b8d61626afd4d059fb5a6a63393e9a1374e78f 192.168.30.129 26379 @ mymaster 192.168.30.128 6379

21574:X 09 May 2019 15:32:31.584 * +sentinel sentinel d7b429dcba792103ef0d80827dd0910bd9284d21 192.168.30.130 26379 @ mymaster 192.168.30.128 6379






Sentinel模式下的几个事件：




· +reset-master ：主服务器已被重置。


· +slave ：一个新的从服务器已经被 Sentinel 识别并关联。


· +failover-state-reconf-slaves ：故障转移状态切换到了 reconf-slaves 状态。


· +failover-detected ：另一个 Sentinel 开始了一次故障转移操作，或者一个从服务器转换成了主服务器。


· +slave-reconf-sent ：领头（leader）的 Sentinel 向实例发送了 [SLAVEOF](/commands/slaveof.html) 命令，为实例设置新的主服务器。


· +slave-reconf-inprog ：实例正在将自己设置为指定主服务器的从服务器，但相应的同步过程仍未完成。


· +slave-reconf-done ：从服务器已经成功完成对新主服务器的同步。


· -dup-sentinel ：对给定主服务器进行监视的一个或多个 Sentinel 已经因为重复出现而被移除 —— 当 Sentinel 实例重启的时候，就会出现这种情况。


· +sentinel ：一个监视给定主服务器的新 Sentinel 已经被识别并添加。


· +sdown ：给定的实例现在处于主观下线状态。


· -sdown ：给定的实例已经不再处于主观下线状态。


· +odown ：给定的实例现在处于客观下线状态。


· -odown ：给定的实例已经不再处于客观下线状态。


· +new-epoch ：当前的纪元（epoch）已经被更新。


· +try-failover ：一个新的故障迁移操作正在执行中，等待被大多数 Sentinel 选中（waiting to be elected by the majority）。


· +elected-leader ：赢得指定纪元的选举，可以进行故障迁移操作了。


· +failover-state-select-slave ：故障转移操作现在处于 select-slave 状态 —— Sentinel 正在寻找可以升级为主服务器的从服务器。


· no-good-slave ：Sentinel 操作未能找到适合进行升级的从服务器。Sentinel 会在一段时间之后再次尝试寻找合适的从服务器来进行升级，又或者直接放弃执行故障转移操作。


· selected-slave ：Sentinel 顺利找到适合进行升级的从服务器。


· failover-state-send-slaveof-noone ：Sentinel 正在将指定的从服务器升级为主服务器，等待升级功能完成。


· failover-end-for-timeout ：故障转移因为超时而中止，不过最终所有从服务器都会开始复制新的主服务器（slaves will eventually be configured to replicate with the new master anyway）。


· failover-end ：故障转移操作顺利完成。所有从服务器都开始复制新的主服务器了。


· +switch-master ：配置变更，主服务器的 IP 和地址已经改变。 这是绝大多数外部用户都关心的信息。


· +tilt ：进入 tilt 模式。


· -tilt ：退出 tilt 模式。






master宕机演示：


192.168.30.128




# systemctl stop redis


# tail -f /usr/local/redis/sentinel.log


22428:X 09 May 2019 15:51:29.287 # +sdown master mymaster 192.168.30.128 6379

22428:X 09 May 2019 15:51:29.371 # +odown master mymaster 192.168.30.128 6379 #quorum 2/2

22428:X 09 May 2019 15:51:29.371 # +new-epoch 1

22428:X 09 May 2019 15:51:29.371 # +try-failover master mymaster 192.168.30.128 6379

22428:X 09 May 2019 15:51:29.385 # +vote-for-leader 30c417116a8edbab09708037366c4a7471beb770 1

22428:X 09 May 2019 15:51:29.403 # d7b429dcba792103ef0d80827dd0910bd9284d21 voted for 30c417116a8edbab09708037366c4a7471beb770 1

22428:X 09 May 2019 15:51:29.408 # 79b8d61626afd4d059fb5a6a63393e9a1374e78f voted for 30c417116a8edbab09708037366c4a7471beb770 1

22428:X 09 May 2019 15:51:29.451 # +elected-leader master mymaster 192.168.30.128 6379

22428:X 09 May 2019 15:51:29.451 # +failover-state-select-slave master mymaster 192.168.30.128 6379

22428:X 09 May 2019 15:51:29.528 # +selected-slave slave 192.168.30.129:6379 192.168.30.129 6379 @ mymaster 192.168.30.128 6379

22428:X 09 May 2019 15:51:29.528 * +failover-state-send-slaveof-noone slave 192.168.30.129:6379 192.168.30.129 6379 @ mymaster 192.168.30.128 6379

22428:X 09 May 2019 15:51:29.594 * +failover-state-wait-promotion slave 192.168.30.129:6379 192.168.30.129 6379 @ mymaster 192.168.30.128 6379

22428:X 09 May 2019 15:51:30.190 # +promoted-slave slave 192.168.30.129:6379 192.168.30.129 6379 @ mymaster 192.168.30.128 6379

22428:X 09 May 2019 15:51:30.190 # +failover-state-reconf-slaves master mymaster 192.168.30.128 6379

22428:X 09 May 2019 15:51:30.258 * +slave-reconf-sent slave 192.168.30.130:6379 192.168.30.130 6379 @ mymaster 192.168.30.128 6379

22428:X 09 May 2019 15:51:30.511 # -odown master mymaster 192.168.30.128 6379

22428:X 09 May 2019 15:51:31.233 * +slave-reconf-inprog slave 192.168.30.130:6379 192.168.30.130 6379 @ mymaster 192.168.30.128 6379

22428:X 09 May 2019 15:51:31.233 * +slave-reconf-done slave 192.168.30.130:6379 192.168.30.130 6379 @ mymaster 192.168.30.128 6379

22428:X 09 May 2019 15:51:31.297 # +failover-end master mymaster 192.168.30.128 6379

22428:X 09 May 2019 15:51:31.297 # +switch-master mymaster 192.168.30.128 6379 192.168.30.129 6379

22428:X 09 May 2019 15:51:31.298 * +slave slave 192.168.30.130:6379 192.168.30.130 6379 @ mymaster 192.168.30.129 6379

22428:X 09 May 2019 15:51:31.298 * +slave slave 192.168.30.128:6379 192.168.30.128 6379 @ mymaster 192.168.30.129 6379

22428:X 09 May 2019 15:52:31.307 # +sdown slave 192.168.30.128:6379 192.168.30.128 6379 @ mymaster 192.168.30.129 6379






从日志中可以看到，master已经从192.168.30.128转移到192.168.30.129上


192.168.30.129上查看集群信息





# /usr/local/bin/redis-cli -h 192.168.30.129 -p 6379 -a 123456
Warning: Using a password with '-a' or '-u' option on the command line interface may not be safe.

192.168.30.129:6379> info replication
# Replication
role:master
connected_slaves:1
slave0:ip=192.168.30.130,port=6379,state=online,offset=291039,lag=1
master_replid:757aff269236ed2707ba584a86a40716c1c76d74
master_replid2:47a862fc0ff20362be29096ecdcca6d432070ee9
master_repl_offset:291182
second_repl_offset:248123
repl_backlog_active:1
repl_backlog_size:1048576
repl_backlog_first_byte_offset:1
repl_backlog_histlen:291182

192.168.30.129:6379> set key4 linux
OK






当前集群中只有一个slave——192.168.30.130，master是192.168.30.129，且192.168.30.129具有写权限。


192.168.30.130上查看redis的配置文件也可以看到replicaof 192.168.30.129 6379，这是sentinel在选举master是做的修改。


重新把192.168.30.128上进程启动






# systemctl start redis


# tail -f /usr/local/redis/sentinel.log


22428:X 09 May 2019 15:51:31.297 # +switch-master mymaster 192.168.30.128 6379 192.168.30.129 6379

22428:X 09 May 2019 15:51:31.298 * +slave slave 192.168.30.130:6379 192.168.30.130 6379 @ mymaster 192.168.30.129 6379

22428:X 09 May 2019 15:51:31.298 * +slave slave 192.168.30.128:6379 192.168.30.128 6379 @ mymaster 192.168.30.129 6379

22428:X 09 May 2019 15:52:31.307 # +sdown slave 192.168.30.128:6379 192.168.30.128 6379 @ mymaster 192.168.30.129 6379

22428:X 09 May 2019 16:01:24.872 # -sdown slave 192.168.30.128:6379 192.168.30.128 6379 @ mymaster 192.168.30.129 6379






查看集群信息





# /usr/local/bin/redis-cli -h 192.168.30.128 -p 6379 -a 123456
Warning: Using a password with '-a' or '-u' option on the command line interface may not be safe.

192.168.30.128:6379> info replication
# Replication
role:slave
master_host:192.168.30.129
master_port:6379
master_link_status:up
master_last_io_seconds_ago:0
master_sync_in_progress:0
slave_repl_offset:514774
slave_priority:100
slave_read_only:1
connected_slaves:0
master_replid:757aff269236ed2707ba584a86a40716c1c76d74
master_replid2:0000000000000000000000000000000000000000
master_repl_offset:514774
second_repl_offset:-1
repl_backlog_active:1
repl_backlog_size:1048576
repl_backlog_first_byte_offset:376528
repl_backlog_histlen:138247

192.168.30.128:6379> get key4
"linux"

192.168.30.128:6379> set key5
(error) ERR wrong number of arguments for 'set' command






即使192.168.30.128重新启动redis服务，也是作为slave加入redis集群，192.168.30.129仍然是master。


Cluster模式


Cluster模式介绍

sentinel模式基本可以满足一般生产的需求，具备高可用性。但是当数据量过大到一台服务器存放不下的情况时，主从模式或sentinel模式就不能满足需求了，这个时候需要对存储的数据进行分片，将数据存储到多个Redis实例中。cluster模式的出现就是为了解决单机Redis容量有限的问题，将Redis的数据根据一定的规则分配到多台机器。


cluster可以说是sentinel和主从模式的结合体，通过cluster可以实现主从和master重选功能，所以如果配置两个副本三个分片的话，就需要六个Redis实例。因为Redis的数据是根据一定规则分配到cluster的不同机器的，当数据量过大时，可以新增机器进行扩容。


使用集群，只需要将redis配置文件中的cluster-enable配置打开即可。每个集群中至少需要三个主数据库才能正常运行，新增节点非常方便。


cluster集群特点：






* 多个redis节点网络互联，数据共享


* 所有的节点都是一主一从（也可以是一主多从），其中从不提供服务，仅作为备用


* 不支持同时处理多个key（如MSET/MGET），因为redis需要把key均匀分布在各个节点上，

并发量很高的情况下同时创建key-value会降低性能并导致不可预测的行为



* 支持在线增加、删除节点


* 客户端可以连接任何一个主节点进行读写






Cluster模式搭建


环境准备：


三台机器，分别开启两个redis服务（端口）




192.168.30.128 端口：7001,7002


192.168.30.129 端口：7003,7004


192.168.30.130 端口：7005,7006






修改配置文件：


192.168.30.128




# mkdir /usr/local/redis/cluster


# cp /usr/local/redis/redis.conf /usr/local/redis/cluster/redis_7001.conf


# cp /usr/local/redis/redis.conf /usr/local/redis/cluster/redis_7002.conf


# chown -R redis:redis /usr/local/redis


# mkdir -p /data/redis/cluster/{redis_7001,redis_7002} && chown -R redis:redis /data/redis









# vim /usr/local/redis/cluster/redis_7001.conf

bind 192.168.30.128
port 7001
daemonize yes
pidfile "/var/run/redis_7001.pid"
logfile "/usr/local/redis/cluster/redis_7001.log"
dir "/data/redis/cluster/redis_7001"
#replicaof 192.168.30.129 6379
masterauth 123456
requirepass 123456
appendonly yes
cluster-enabled yes
cluster-config-file nodes_7001.conf
cluster-node-timeout 15000









# vim /usr/local/redis/cluster/redis_7002.conf

bind 192.168.30.128
port 7002
daemonize yes
pidfile "/var/run/redis_7002.pid"
logfile "/usr/local/redis/cluster/redis_7002.log"
dir "/data/redis/cluster/redis_7002"
#replicaof 192.168.30.129 6379
masterauth "123456"
requirepass "123456"
appendonly yes
cluster-enabled yes
cluster-config-file nodes_7002.conf
cluster-node-timeout 15000






其它两台机器配置与192.168.30.128一致，此处省略


启动redis服务：




# redis-server /usr/local/redis/cluster/redis_7001.conf


# tail -f /usr/local/redis/cluster/redis_7001.log


# redis-server /usr/local/redis/cluster/redis_7002.conf


# tail -f /usr/local/redis/cluster/redis_7002.log






其它两台机器启动与192.168.30.128一致，此处省略


安装ruby并创建集群（低版本）：

如果redis版本比较低，则需要安装ruby。任选一台机器安装ruby即可





# yum -y groupinstall "Development Tools"

# yum install -y gdbm-devel libdb4-devel libffi-devel libyaml libyaml-devel ncurses-devel openssl-devel readline-devel tcl-devel

# mkdir -p ~/rpmbuild/{BUILD,BUILDROOT,RPMS,SOURCES,SPECS,SRPMS}

# wget http://cache.ruby-lang.org/pub/ruby/2.2/ruby-2.2.3.tar.gz -P ~/rpmbuild/SOURCES

# wget http://raw.githubusercontent.com/tjinjin/automate-ruby-rpm/master/ruby22x.spec -P ~/rpmbuild/SPECS

# rpmbuild -bb ~/rpmbuild/SPECS/ruby22x.spec

# rpm -ivh ~/rpmbuild/RPMS/x86_64/ruby-2.2.3-1.el7.x86_64.rpm

# gem install redis         #目的是安装这个，用于配置集群








# cp /usr/local/redis/src/redis-trib.rb /usr/bin/


# redis-trib.rb create --replicas 1 192.168.30.128:7001 192.168.30.128:7002 192.168.30.129:7003 192.168.30.129:7004 192.168.30.130:7005 192.168.30.130:7006






创建集群：


我这里是redis6.0.5，所以不需要安装ruby，直接创建集群即可





# redis-cli -a 123456 --cluster create 192.168.30.128:7001 192.168.30.128:7002 192.168.30.129:7003 192.168.30.129:7004 192.168.30.130:7005 192.168.30.130:7006 --cluster-replicas 1

Warning: Using a password with '-a' or '-u' option on the command line interface may not be safe.
> Performing hash slots allocation on 6 nodes...
Master[0] -> Slots 0 - 5460
Master[1] -> Slots 5461 - 10922
Master[2] -> Slots 10923 - 16383
Adding replica 192.168.30.129:7004 to 192.168.30.128:7001
Adding replica 192.168.30.130:7006 to 192.168.30.129:7003
Adding replica 192.168.30.128:7002 to 192.168.30.130:7005
M: 80c80a3f3e33872c047a8328ad579b9bea001ad8 192.168.30.128:7001
  slots:[0-5460] (5461 slots) master
S: b4d3eb411a7355d4767c6c23b4df69fa183ef8bc 192.168.30.128:7002
  replicates 6788453ee9a8d7f72b1d45a9093838efd0e501f1
M: 4d74ec66e898bf09006dac86d4928f9fad81f373 192.168.30.129:7003
  slots:[5461-10922] (5462 slots) master
S: b6331cbc986794237c83ed2d5c30777c1551546e 192.168.30.129:7004
  replicates 80c80a3f3e33872c047a8328ad579b9bea001ad8
M: 6788453ee9a8d7f72b1d45a9093838efd0e501f1 192.168.30.130:7005
  slots:[10923-16383] (5461 slots) master
S: 277daeb8660d5273b7c3e05c263f861ed5f17b92 192.168.30.130:7006
  replicates 4d74ec66e898bf09006dac86d4928f9fad81f373
Can I set the above configuration"htmlcode">



# ls /data/redis/cluster/redis_7001/
appendonly.aof dump.rdb nodes-7001.conf

# vim /data/redis/cluster/redis_7001/nodes-7001.conf 

6788453ee9a8d7f72b1d45a9093838efd0e501f1 192.168.30.130:7005@17005 master - 0 1557454406312 5 connected 10923-16383
277daeb8660d5273b7c3e05c263f861ed5f17b92 192.168.30.130:7006@17006 slave 4d74ec66e898bf09006dac86d4928f9fad81f373 0 1557454407000 6 connected
b4d3eb411a7355d4767c6c23b4df69fa183ef8bc 192.168.30.128:7002@17002 slave 6788453ee9a8d7f72b1d45a9093838efd0e501f1 0 1557454408371 5 connected
80c80a3f3e33872c047a8328ad579b9bea001ad8 192.168.30.128:7001@17001 myself,master - 0 1557454406000 1 connected 0-5460
b6331cbc986794237c83ed2d5c30777c1551546e 192.168.30.129:7004@17004 slave 80c80a3f3e33872c047a8328ad579b9bea001ad8 0 1557454407366 4 connected
4d74ec66e898bf09006dac86d4928f9fad81f373 192.168.30.129:7003@17003 master - 0 1557454407000 3 connected 5461-10922
vars currentEpoch 6 lastVoteEpoch 0






集群操作


登录集群：




# redis-cli -c -h 192.168.30.128 -p 7001 -a 123456 # -c，使用集群方式登录






查看集群信息：




192.168.30.128:7001> CLUSTER INFO #集群状态


cluster_state:ok

cluster_slots_assigned:16384

cluster_slots_ok:16384

cluster_slots_pfail:0

cluster_slots_fail:0

cluster_known_nodes:6

cluster_size:3

cluster_current_epoch:6

cluster_my_epoch:1

cluster_stats_messages_ping_sent:580

cluster_stats_messages_pong_sent:551

cluster_stats_messages_sent:1131

cluster_stats_messages_ping_received:546

cluster_stats_messages_pong_received:580

cluster_stats_messages_meet_received:5

cluster_stats_messages_received:1131






列出节点信息：





192.168.30.128:7001> CLUSTER NODES         #列出节点信息

6788453ee9a8d7f72b1d45a9093838efd0e501f1 192.168.30.130:7005@17005 master - 0 1557455176000 5 connected 10923-16383
277daeb8660d5273b7c3e05c263f861ed5f17b92 192.168.30.130:7006@17006 slave 4d74ec66e898bf09006dac86d4928f9fad81f373 0 1557455174000 6 connected
b4d3eb411a7355d4767c6c23b4df69fa183ef8bc 192.168.30.128:7002@17002 slave 6788453ee9a8d7f72b1d45a9093838efd0e501f1 0 1557455175000 5 connected
80c80a3f3e33872c047a8328ad579b9bea001ad8 192.168.30.128:7001@17001 myself,master - 0 1557455175000 1 connected 0-5460
b6331cbc986794237c83ed2d5c30777c1551546e 192.168.30.129:7004@17004 slave 80c80a3f3e33872c047a8328ad579b9bea001ad8 0 1557455174989 4 connected
4d74ec66e898bf09006dac86d4928f9fad81f373 192.168.30.129:7003@17003 master - 0 1557455175995 3 connected 5461-10922






这里与nodes.conf文件内容相同


写入数据：





192.168.30.128:7001> set key111 aaa
-> Redirected to slot [13680] located at 192.168.30.130:7005        #说明数据到了192.168.30.130:7005上
OK

192.168.30.130:7005> set key222 bbb
-> Redirected to slot [2320] located at 192.168.30.128:7001         #说明数据到了192.168.30.128:7001上
OK

192.168.30.128:7001> set key333 ccc
-> Redirected to slot [7472] located at 192.168.30.129:7003         #说明数据到了192.168.30.129:7003上
OK

192.168.30.129:7003> get key111
-> Redirected to slot [13680] located at 192.168.30.130:7005
"aaa"

192.168.30.130:7005> get key333
-> Redirected to slot [7472] located at 192.168.30.129:7003
"ccc"

192.168.30.129:7003> 






可以看出redis cluster集群是去中心化的，每个节点都是平等的，连接哪个节点都可以获取和设置数据。


当然，平等指的是master节点，因为slave节点根本不提供服务，只是作为对应master节点的一个备份。


增加节点：


192.168.30.129上增加一节点：





# cp /usr/local/redis/cluster/redis_7003.conf /usr/local/redis/cluster/redis_7007.conf

# vim /usr/local/redis/cluster/redis_7007.conf

bind 192.168.30.129
port 7007
daemonize yes
pidfile "/var/run/redis_7007.pid"
logfile "/usr/local/redis/cluster/redis_7007.log"
dir "/data/redis/cluster/redis_7007"
#replicaof 192.168.30.129 6379
masterauth "123456"
requirepass "123456"
appendonly yes
cluster-enabled yes
cluster-config-file nodes_7007.conf
cluster-node-timeout 15000

# mkdir /data/redis/cluster/redis_7007

# chown -R redis:redis /usr/local/redis && chown -R redis:redis /data/redis

# redis-server /usr/local/redis/cluster/redis_7007.conf 






192.168.30.130上增加一节点：





# cp /usr/local/redis/cluster/redis_7005.conf /usr/local/redis/cluster/redis_7008.conf

# vim /usr/local/redis/cluster/redis_7007.conf

bind 192.168.30.130
port 7008
daemonize yes
pidfile "/var/run/redis_7008.pid"
logfile "/usr/local/redis/cluster/redis_7008.log"
dir "/data/redis/cluster/redis_7008"
#replicaof 192.168.30.130 6379
masterauth "123456"
requirepass "123456"
appendonly yes
cluster-enabled yes
cluster-config-file nodes_7008.conf
cluster-node-timeout 15000

# mkdir /data/redis/cluster/redis_7008

# chown -R redis:redis /usr/local/redis && chown -R redis:redis /data/redis

# redis-server /usr/local/redis/cluster/redis_7008.conf 






集群中增加节点：





192.168.30.129:7003> CLUSTER MEET 192.168.30.129 7007
OK

192.168.30.129:7003> CLUSTER NODES

4d74ec66e898bf09006dac86d4928f9fad81f373 192.168.30.129:7003@17003 myself,master - 0 1557457361000 3 connected 5461-10922
80c80a3f3e33872c047a8328ad579b9bea001ad8 192.168.30.128:7001@17001 master - 0 1557457364746 1 connected 0-5460
277daeb8660d5273b7c3e05c263f861ed5f17b92 192.168.30.130:7006@17006 slave 4d74ec66e898bf09006dac86d4928f9fad81f373 0 1557457362000 6 connected
b6331cbc986794237c83ed2d5c30777c1551546e 192.168.30.129:7004@17004 slave 80c80a3f3e33872c047a8328ad579b9bea001ad8 0 1557457363000 4 connected
b4d3eb411a7355d4767c6c23b4df69fa183ef8bc 192.168.30.128:7002@17002 slave 6788453ee9a8d7f72b1d45a9093838efd0e501f1 0 1557457362000 5 connected
e51ab166bc0f33026887bcf8eba0dff3d5b0bf14 192.168.30.129:7007@17007 master - 0 1557457362729 0 connected
6788453ee9a8d7f72b1d45a9093838efd0e501f1 192.168.30.130:7005@17005 master - 0 1557457363739 5 connected 10923-16383









192.168.30.129:7003> CLUSTER MEET 192.168.30.130 7008
OK

192.168.30.129:7003> CLUSTER NODES

4d74ec66e898bf09006dac86d4928f9fad81f373 192.168.30.129:7003@17003 myself,master - 0 1557457489000 3 connected 5461-10922
80c80a3f3e33872c047a8328ad579b9bea001ad8 192.168.30.128:7001@17001 master - 0 1557457489000 1 connected 0-5460
277daeb8660d5273b7c3e05c263f861ed5f17b92 192.168.30.130:7006@17006 slave 4d74ec66e898bf09006dac86d4928f9fad81f373 0 1557457489000 6 connected
b6331cbc986794237c83ed2d5c30777c1551546e 192.168.30.129:7004@17004 slave 80c80a3f3e33872c047a8328ad579b9bea001ad8 0 1557457488000 4 connected
b4d3eb411a7355d4767c6c23b4df69fa183ef8bc 192.168.30.128:7002@17002 slave 6788453ee9a8d7f72b1d45a9093838efd0e501f1 0 1557457489472 5 connected
1a1c7f02fce87530bd5abdfc98df1cffce4f1767 192.168.30.130:7008@17008 master - 0 1557457489259 0 connected
e51ab166bc0f33026887bcf8eba0dff3d5b0bf14 192.168.30.129:7007@17007 master - 0 1557457489000 0 connected
6788453ee9a8d7f72b1d45a9093838efd0e501f1 192.168.30.130:7005@17005 master - 0 1557457490475 5 connected 10923-16383






可以看到，新增的节点都是以master身份加入集群的


更换节点身份：


将新增的192.168.30.130:7008节点身份改为192.168.30.129:7007的slave




# redis-cli -c -h 192.168.30.130 -p 7008 -a 123456 cluster replicate e51ab166bc0f33026887bcf8eba0dff3d5b0bf14






cluster replicate后面跟node_id，更改对应节点身份。也可以登入集群更改







# redis-cli -c -h 192.168.30.130 -p 7008 -a 123456

192.168.30.130:7008> CLUSTER REPLICATE e51ab166bc0f33026887bcf8eba0dff3d5b0bf14
OK

192.168.30.130:7008> CLUSTER NODES

277daeb8660d5273b7c3e05c263f861ed5f17b92 192.168.30.130:7006@17006 slave 4d74ec66e898bf09006dac86d4928f9fad81f373 0 1557458316881 3 connected
80c80a3f3e33872c047a8328ad579b9bea001ad8 192.168.30.128:7001@17001 master - 0 1557458314864 1 connected 0-5460
4d74ec66e898bf09006dac86d4928f9fad81f373 192.168.30.129:7003@17003 master - 0 1557458316000 3 connected 5461-10922
6788453ee9a8d7f72b1d45a9093838efd0e501f1 192.168.30.130:7005@17005 master - 0 1557458315872 5 connected 10923-16383
b4d3eb411a7355d4767c6c23b4df69fa183ef8bc 192.168.30.128:7002@17002 slave 6788453ee9a8d7f72b1d45a9093838efd0e501f1 0 1557458317890 5 connected
1a1c7f02fce87530bd5abdfc98df1cffce4f1767 192.168.30.130:7008@17008 myself,slave e51ab166bc0f33026887bcf8eba0dff3d5b0bf14 0 1557458315000 7 connected
b6331cbc986794237c83ed2d5c30777c1551546e 192.168.30.129:7004@17004 slave 80c80a3f3e33872c047a8328ad579b9bea001ad8 0 1557458315000 1 connected
e51ab166bc0f33026887bcf8eba0dff3d5b0bf14 192.168.30.129:7007@17007 master - 0 1557458314000 0 connected






查看相应的nodes.conf文件，可以发现有更改，它记录当前集群的节点信息




# cat /data/redis/cluster/redis_7001/nodes-7001.conf


1a1c7f02fce87530bd5abdfc98df1cffce4f1767 192.168.30.130:7008@17008 slave e51ab166bc0f33026887bcf8eba0dff3d5b0bf14 0 1557458236169 7 connected

6788453ee9a8d7f72b1d45a9093838efd0e501f1 192.168.30.130:7005@17005 master - 0 1557458235000 5 connected 10923-16383

277daeb8660d5273b7c3e05c263f861ed5f17b92 192.168.30.130:7006@17006 slave 4d74ec66e898bf09006dac86d4928f9fad81f373 0 1557458234103 6 connected

b4d3eb411a7355d4767c6c23b4df69fa183ef8bc 192.168.30.128:7002@17002 slave 6788453ee9a8d7f72b1d45a9093838efd0e501f1 0 1557458235129 5 connected

80c80a3f3e33872c047a8328ad579b9bea001ad8 192.168.30.128:7001@17001 myself,master - 0 1557458234000 1 connected 0-5460

b6331cbc986794237c83ed2d5c30777c1551546e 192.168.30.129:7004@17004 slave 80c80a3f3e33872c047a8328ad579b9bea001ad8 0 1557458236000 4 connected

e51ab166bc0f33026887bcf8eba0dff3d5b0bf14 192.168.30.129:7007@17007 master - 0 1557458236000 0 connected

4d74ec66e898bf09006dac86d4928f9fad81f373 192.168.30.129:7003@17003 master - 0 1557458233089 3 connected 5461-10922

vars currentEpoch 7 lastVoteEpoch 0






删除节点：




192.168.30.130:7008> CLUSTER FORGET 1a1c7f02fce87530bd5abdfc98df1cffce4f1767

(error) ERR I tried hard but I can't forget myself... #无法删除登录节点


192.168.30.130:7008> CLUSTER FORGET e51ab166bc0f33026887bcf8eba0dff3d5b0bf14

(error) ERR Can't forget my master! #不能删除自己的master节点


192.168.30.130:7008> CLUSTER FORGET 6788453ee9a8d7f72b1d45a9093838efd0e501f1

OK #可以删除其它的master节点


192.168.30.130:7008> CLUSTER NODES


277daeb8660d5273b7c3e05c263f861ed5f17b92 192.168.30.130:7006@17006 slave 4d74ec66e898bf09006dac86d4928f9fad81f373 0 1557458887328 3 connected

80c80a3f3e33872c047a8328ad579b9bea001ad8 192.168.30.128:7001@17001 master - 0 1557458887000 1 connected 0-5460

4d74ec66e898bf09006dac86d4928f9fad81f373 192.168.30.129:7003@17003 master - 0 1557458886000 3 connected 5461-10922

b4d3eb411a7355d4767c6c23b4df69fa183ef8bc 192.168.30.128:7002@17002 slave - 0 1557458888351 5 connected

1a1c7f02fce87530bd5abdfc98df1cffce4f1767 192.168.30.130:7008@17008 myself,slave e51ab166bc0f33026887bcf8eba0dff3d5b0bf14 0 1557458885000 7 connected

b6331cbc986794237c83ed2d5c30777c1551546e 192.168.30.129:7004@17004 slave 80c80a3f3e33872c047a8328ad579b9bea001ad8 0 1557458883289 1 connected

e51ab166bc0f33026887bcf8eba0dff3d5b0bf14 192.168.30.129:7007@17007 master - 0 1557458885310 0 connected


192.168.30.130:7008> CLUSTER FORGET b4d3eb411a7355d4767c6c23b4df69fa183ef8bc

OK #可以删除其它的slave节点


192.168.30.130:7008> CLUSTER NODES


277daeb8660d5273b7c3e05c263f861ed5f17b92 192.168.30.130:7006@17006 slave 4d74ec66e898bf09006dac86d4928f9fad81f373 0 1557459031397 3 connected

80c80a3f3e33872c047a8328ad579b9bea001ad8 192.168.30.128:7001@17001 master - 0 1557459032407 1 connected 0-5460

4d74ec66e898bf09006dac86d4928f9fad81f373 192.168.30.129:7003@17003 master - 0 1557459035434 3 connected 5461-10922

6788453ee9a8d7f72b1d45a9093838efd0e501f1 192.168.30.130:7005@17005 master - 0 1557459034000 5 connected 10923-16383

1a1c7f02fce87530bd5abdfc98df1cffce4f1767 192.168.30.130:7008@17008 myself,slave e51ab166bc0f33026887bcf8eba0dff3d5b0bf14 0 1557459032000 7 connected

b6331cbc986794237c83ed2d5c30777c1551546e 192.168.30.129:7004@17004 slave 80c80a3f3e33872c047a8328ad579b9bea001ad8 0 1557459034000 1 connected

e51ab166bc0f33026887bcf8eba0dff3d5b0bf14 192.168.30.129:7007@17007 master - 0 1557459034427 0 connected






保存配置：




192.168.30.130:7008> CLUSTER SAVECONFIG #将节点配置信息保存到硬盘

OK



# cat /data/redis/cluster/redis_7001/nodes-7001.conf


1a1c7f02fce87530bd5abdfc98df1cffce4f1767 192.168.30.130:7008@17008 slave e51ab166bc0f33026887bcf8eba0dff3d5b0bf14 0 1557458236169 7 connected

6788453ee9a8d7f72b1d45a9093838efd0e501f1 192.168.30.130:7005@17005 master - 0 1557458235000 5 connected 10923-16383

277daeb8660d5273b7c3e05c263f861ed5f17b92 192.168.30.130:7006@17006 slave 4d74ec66e898bf09006dac86d4928f9fad81f373 0 1557458234103 6 connected

b4d3eb411a7355d4767c6c23b4df69fa183ef8bc 192.168.30.128:7002@17002 slave 6788453ee9a8d7f72b1d45a9093838efd0e501f1 0 1557458235129 5 connected

80c80a3f3e33872c047a8328ad579b9bea001ad8 192.168.30.128:7001@17001 myself,master - 0 1557458234000 1 connected 0-5460

b6331cbc986794237c83ed2d5c30777c1551546e 192.168.30.129:7004@17004 slave 80c80a3f3e33872c047a8328ad579b9bea001ad8 0 1557458236000 4 connected

e51ab166bc0f33026887bcf8eba0dff3d5b0bf14 192.168.30.129:7007@17007 master - 0 1557458236000 0 connected

4d74ec66e898bf09006dac86d4928f9fad81f373 192.168.30.129:7003@17003 master - 0 1557458233089 3 connected 5461-10922

vars currentEpoch 7 lastVoteEpoch 0


# redis-cli -c -h 192.168.30.130 -p 7008 -a 123456

Warning: Using a password with '-a' or '-u' option on the command line interface may not be safe.


192.168.30.130:7008> CLUSTER NODES

277daeb8660d5273b7c3e05c263f861ed5f17b92 192.168.30.130:7006@17006 slave 4d74ec66e898bf09006dac86d4928f9fad81f373 0 1557459500741 3 connected

80c80a3f3e33872c047a8328ad579b9bea001ad8 192.168.30.128:7001@17001 master - 0 1557459500000 1 connected 0-5460

4d74ec66e898bf09006dac86d4928f9fad81f373 192.168.30.129:7003@17003 master - 0 1557459501000 3 connected 5461-10922

6788453ee9a8d7f72b1d45a9093838efd0e501f1 192.168.30.130:7005@17005 master - 0 1557459500000 5 connected 10923-16383

b4d3eb411a7355d4767c6c23b4df69fa183ef8bc 192.168.30.128:7002@17002 slave 6788453ee9a8d7f72b1d45a9093838efd0e501f1 0 1557459499737 5 connected

1a1c7f02fce87530bd5abdfc98df1cffce4f1767 192.168.30.130:7008@17008 myself,slave e51ab166bc0f33026887bcf8eba0dff3d5b0bf14 0 1557459499000 7 connected

b6331cbc986794237c83ed2d5c30777c1551546e 192.168.30.129:7004@17004 slave 80c80a3f3e33872c047a8328ad579b9bea001ad8 0 1557459501750 1 connected

e51ab166bc0f33026887bcf8eba0dff3d5b0bf14 192.168.30.129:7007@17007 master - 0 1557459498000 0 connected






可以看到，之前删除的节点又恢复了，这是因为对应的配置文件没有删除，执行CLUSTER SAVECONFIG恢复。


模拟master节点挂掉：


192.168.30.128





# netstat -lntp |grep 7001
tcp    0   0 192.168.30.128:17001  0.0.0.0:*        LISTEN   6701/redis-server 1 
tcp    0   0 192.168.30.128:7001   0.0.0.0:*        LISTEN   6701/redis-server 1 

# kill 6701








192.168.30.130:7008> CLUSTER NODES


277daeb8660d5273b7c3e05c263f861ed5f17b92 192.168.30.130:7006@17006 slave 4d74ec66e898bf09006dac86d4928f9fad81f373 0 1557461178000 3 connected

80c80a3f3e33872c047a8328ad579b9bea001ad8 192.168.30.128:7001@17001 master,fail - 1557460950483 1557460947145 1 disconnected

4d74ec66e898bf09006dac86d4928f9fad81f373 192.168.30.129:7003@17003 master - 0 1557461174922 3 connected 5461-10922

6788453ee9a8d7f72b1d45a9093838efd0e501f1 192.168.30.130:7005@17005 master - 0 1557461181003 5 connected 10923-16383

b4d3eb411a7355d4767c6c23b4df69fa183ef8bc 192.168.30.128:7002@17002 slave 6788453ee9a8d7f72b1d45a9093838efd0e501f1 0 1557461179993 5 connected

1a1c7f02fce87530bd5abdfc98df1cffce4f1767 192.168.30.130:7008@17008 myself,slave e51ab166bc0f33026887bcf8eba0dff3d5b0bf14 0 1557461176000 7 connected

b6331cbc986794237c83ed2d5c30777c1551546e 192.168.30.129:7004@17004 master - 0 1557461178981 8 connected 0-5460

e51ab166bc0f33026887bcf8eba0dff3d5b0bf14 192.168.30.129:7007@17007 master - 0 1557461179000 0 connected






对应7001的一行可以看到，master fail，状态为disconnected；而对应7004的一行，slave已经变成master。


重新启动7001节点：





# redis-server /usr/local/redis/cluster/redis_7001.conf

192.168.30.130:7008> CLUSTER NODES

277daeb8660d5273b7c3e05c263f861ed5f17b92 192.168.30.130:7006@17006 slave 4d74ec66e898bf09006dac86d4928f9fad81f373 0 1557461307000 3 connected
80c80a3f3e33872c047a8328ad579b9bea001ad8 192.168.30.128:7001@17001 slave b6331cbc986794237c83ed2d5c30777c1551546e 0 1557461305441 8 connected
4d74ec66e898bf09006dac86d4928f9fad81f373 192.168.30.129:7003@17003 master - 0 1557461307962 3 connected 5461-10922
6788453ee9a8d7f72b1d45a9093838efd0e501f1 192.168.30.130:7005@17005 master - 0 1557461304935 5 connected 10923-16383
b4d3eb411a7355d4767c6c23b4df69fa183ef8bc 192.168.30.128:7002@17002 slave 6788453ee9a8d7f72b1d45a9093838efd0e501f1 0 1557461306000 5 connected
1a1c7f02fce87530bd5abdfc98df1cffce4f1767 192.168.30.130:7008@17008 myself,slave e51ab166bc0f33026887bcf8eba0dff3d5b0bf14 0 1557461305000 7 connected
b6331cbc986794237c83ed2d5c30777c1551546e 192.168.30.129:7004@17004 master - 0 1557461308972 8 connected 0-5460
e51ab166bc0f33026887bcf8eba0dff3d5b0bf14 192.168.30.129:7007@17007 master - 0 1557461307000 0 connected






可以看到，7001节点启动后为slave节点，并且是7004的slave节点。即master节点如果挂掉，它的slave节点变为新master节点继续对外提供服务，而原来的master节点如果重启，则变为新master节点的slave节点。


另外，如果这里是拿7007节点做测试的话，会发现7008节点并不会切换，这是因为7007节点上根本没数据。集群数据被分为三份，采用哈希槽 (hash slot)的方式来分配16384个slot的话，它们三个节点分别承担的slot 区间是：






节点7004覆盖0－5460

节点7003覆盖5461－10922

节点7005覆盖10923－16383




更多参考：


Redis集群常用命令
茶园资源网 Design By www.iooam.com
广告合作：本站广告合作请联系QQ：858582 申请时备注：广告合作（否则不回）
免责声明：本站资源来自互联网收集,仅供用于学习和交流,请遵循相关法律法规,本站一切资源不代表本站立场,如有侵权、后门、不妥请联系本站删除！
茶园资源网 Design By www.iooam.com
www.iooam.com 茶园资源网
39,976影音资源
44,792技术资源
21,817软件资源
651,128站长资源

《魔兽世界》大逃杀！60人新游玩模式《强袭风暴》3月21日上线

暴雪近日发布了《魔兽世界》10.2.6 更新内容，新游玩模式《强袭风暴》即将于3月21 日在亚服上线，届时玩家将前往阿拉希高地展开一场 60 人大逃杀对战。

艾泽拉斯的冒险者已经征服了艾泽拉斯的大地及遥远的彼岸。他们在对抗世界上最致命的敌人时展现出过人的手腕，并且成功阻止终结宇宙等级的威胁。当他们在为即将于《魔兽世界》资料片《地心之战》中来袭的萨拉塔斯势力做战斗准备时，他们还需要在熟悉的阿拉希高地面对一个全新的敌人──那就是彼此。在《巨龙崛起》10.2.6 更新的《强袭风暴》中，玩家将会进入一个全新的海盗主题大逃杀式限时活动，其中包含极高的风险和史诗级的奖励。

《强袭风暴》不是普通的战场，作为一个独立于主游戏之外的活动，玩家可以用大逃杀的风格来体验《魔兽世界》，不分职业、不分装备（除了你在赛局中捡到的），光是技巧和战略的强弱之分就能决定出谁才是能坚持到最后的赢家。本次活动将会开放单人和双人模式，玩家在加入海盗主题的预赛大厅区域前，可以从强袭风暴角色画面新增好友。游玩游戏将可以累计名望轨迹，《巨龙崛起》和《魔兽世界：巫妖王之怒 经典版》的玩家都可以获得奖励。

更新日志

友情链接

杰晶网络 DDR爱好者之家 桃源资源网 杰网资源 富贵资源网 南强小屋 铁雪资源网 幽灵资源网 万梅资源网 狼山资源网 白云岛资源网 昆仑资源网 相思资源网 明霞山资源网 内蒙古资源网 黑松山资源网 茶园资源网 饿虎岗资源网 大旗谷资源网 常春岛资源网 岱庙资源网 兴国资源网 快活林资源网 蝙蝠岛资源网 帝王谷资源网 白云城资源网 伏龙阁资源网 清风细雨楼 天枫庄资源网 圆月山庄资源网 无争山庄资源网 神水资源网 移花宫资源网 神剑山庄资源网 无为清净楼资源网 金钱帮资源网 丐帮资源网 华山资源网 极乐门资源网 小李飞刀资源网 凤求凰客栈 风云阁资源网 金狮镖局 鸳鸯亭资源网 千金楼资源网 更多链接
茶园资源网 Design By www.iooam.com